Tag Archives: PE

1:600 Moskva: Aurora vs Airfix

One of the first ship kits I built was the 1:600 scale Aurora Moscow helicopter anti-submarine ship (not to be confused with the Moskva of the Atlant class of missile cruisers, aka Project 1164).  I also built the Airfix version, and there are differences.

Back then it was the final two decades of the Cold War (unbeknownst to both NATO and Warsaw Pact) and we average kit builders in the United States didn’t have access to reliable information on Warsaw Pact vehicles.  Most publications in English would only say that what we now know was Project 1123 Kondor couldn’t handle rough seas, and that production was halted after only two ships were launched.  I always doubted such NATO propaganda because if the ships were so bad why were they in use until the mid-1990s?

Today we do have access to reliable info (including Kagero Top Drawings #55 book, with detailed scale drawings of things like missile launchers, for those of us who read English), and we have at least one aftermarket detailing set for the 1:600 scale Moskva.  I spent a lot of money on a Russian magazine supplement before learning about the Kagero book.  I also got a hold of the photo etched set #618 by White Ensign.

The Aurora Moscow was first issued in 1969, and for some reason last issued in 1972.  Airfix issued their Moskva in 1973, and as far as I know last issued it in the late 1990s.  In the early 1980s it was issued in the U.S. under the MPC brand.

The Aurora and Airfix hulls are just short of 13 inches (33cm) long, the Aurora being slightly shorter than Airfix.  The Aurora hull is also taller and skinnier than the Airfix hull.  The anchors are molded onto the Aurora hull and both kits have different shaped hull openings and portholes.

Both kits have chunky plastic for the radar antennae. Both kits do not come with missiles for the missile launchers.  Both kits do not have the massive retractable sonar dome located towards the front of the bottom of the hull.  It was this massive dome that was probably the reason the tall ship reportedly nose dived into the water during rough seas.  Apparently NATO was unaware of this dome during the Cold War, or for some reason it was never mentioned in publications made available to the general public.

The Airfix Kamov helicopters are molded in two halves and don’t look good.  The Aurora helicopters are molded in one piece, they look good but not quite like Kamovs (more like Kamovs than Airfix).  The plus with the Aurora kit is you get optional retracted/folded rotor blades.  The Aurora deck is one piece with more detailing than Airfix, and even has optional position hanger doors and space in the superstructure/funnel (molded in two pieces) area.  The Airfix deck is in three pieces, it has optional position hanger doors but the space in the superstructure/funnel (molded in three pieces) is blanked off.  The Airfix helicopter deck has recessed spaces to represent elevators.

The big open ass, I mean aft end, I mean stern of the ship is plane Jane in the Aurora kit, with two life boats.  There’s some kind of blocky details in the Airfix kit.  Aurora gives you davits to hang the life boats on, while Airfix gives you upside down ‘U’s to set them on.  The propellers, I mean screws are different in shape and size between the two kits.

The ship has two large cranes, Aurora uses chunks of plastic to represent them while Airfix gives you a better looking multi-part system.

Click on the pics to make them bigger:

The White Ensign photo etched set has thin brass parts for the radars, railings, davits, cranes, hanger doors, missile launcher detailing, much better details for the ass end, ship name plates (Moscow & Leningrad) and parts for the Airfix helicopters (including tini-tiny landing gear parts which’l probably bend under the weight of the plastic).  A major problem with White Ensign’s instructions is that they leave out where to use the differently shaped hand rails.  Also, you get PE rotor blades in the extended position, but not retracted.

If you love 1:600 scale ships the best way to get a good looking and close to accurate Moskva/Leningrád is to kit bash the Airfix and Aurora kits, use the White Ensign Models PE set, and scratch build missiles, as well as the sonar domes under the hull.

Note: Research is also key to making as accurate a Project 1123 as you can.  The ships had numerous different hull numbers and even different ‘paint jobs’ over the decades.  You’ll need to find color photographs of a specific hull number, especially overhead views which’l reveal what color/colors the decks were painted.

 MOSKVA CLASS SUBMARINE HUNTERS, STOP CALLING THEM AIRCRAFT CARRIERS!

1:600 USS IOWA CLASS KITS: AURORA, MONOGRAM, OTAKI, REVELL. AN APPEAL TO AIRFIX!

1:72 HEINKEL HE-51: HASEGAWA VS. ICM